Gang-08P2 Universal Gang Programmer

The Gang-08P2 is Versatile

The Gang-08P2 can program up to 8 EPROM, EEPROM, FLASH, microcontrollers, GAL, Serial PROM, DSP, and other device types. The Gang-08P2 has room for up to 8 interchangeable sockets. When you need to change to a new device family or package you simply change the sockets, not the whole programmer. Support is provided for all of the latest package styles including DIP, PLCC, SOP/SOIC, TSOP, SSOP, QFP, TQFP, MQFP, and others.

For a list of the devices supported by the Gang-08P2 select this link - to return use the BACK button on your browser.

A high speed serial or parallel port (up to 130K bytes/sec) connects the programmer to any desktop or laptop PC running Windows 95/98NT/2K/XP. The software interface is a native Windows application.

The Gang-08P2 is reliable

We have over 10 years of experience designing gang programming systems for production environments. We have an installed bas of over 20,000 gang programmers world-wide in use at some of the largest and most respected companies in the computer and embedded systems industry. Close relations with all major IC manufacturers keep our engineers well informed of all of the latest programming algorithm releases. Our company's programming algorithms have been tested and approved by leading IC manufacturers worldwide.

Our dedicated high speed CPU and our new surface mount SIMM module pin driver circuits combine to provide extremely accurate programming waveforms, high speed, high reliability, and a compact form factor compared to traditional gang programmers. The Gang-08P2 pin drivers are fully programmable to support programming and testing of standard and low voltage devices. Built in protection circuits guard against over current and reverse insertion errors. The Gang-08P2 meets CE requirements and every Gang-08P2 is backed by a 1 year hardware warranty.

Gang-08P2 is fast

• Up to 8 28F010 FLASH can be programmed in just 15 seconds
• Up to 8 28F020 FLASH can be programmed in under 30 seconds using a Gang-08P2

Gang-08P2 is easy to operate

The Gang-08P2's new Windows interface makes programming simple. Choose a device manufacturer and device type from a menu. Read in a file from a master device or load a file from the PC. Click on the "Blank Check" button to check if the device is blank, click the "Program" button to program the device, or click the "Auto" button to use the Auto function. The Auto functions displays all available functions to perform on the device (i.e. blank check, program, verify, program security, protect/unprotect sectors, etc...) Simply check off the operations you want to perform. After all desired operations are selected the programmer can be operated by a single external key on the programmer to initiate the operations. LED's next to each socket indicate that all operations were performed OK on the given device.

Maximise your investment

The Gang-08P2 is not just a dedicated EPROM/FLASH programmer. It can be expanded to support microcontrollers, Serial PROM, WSI PSD peripherals, 16V8/20V8/22V10 and other PLD/GAL devices, and much more by using our interchangeable socket heads. The Gang-08P2's socket heads let you support devices in nearly any package and devices with nearly any pin count.

For a list of the devices supported by the Gang-08P2select this link - to return use the BACK button on your browser.