Computer Solutions Ltd
Whats New | Advanced Search
Downloads | Exchange Rates

Celebrating 38 years
supplying all your CAN and Embedded Development Tool needs

 


Cortex M0-M4 Development Tools


 

If you are using the Kinetis chip our Kinetis page shows the wide range of different development environments and products (including these one) that support it.

 

 

 

The USB Multilink Universal Interfaces

These greatly simplify the task of programming and debugging embedded target systems. They allow a PC to communicate with a target processor through a high-speed USB interface at the PC and a debug port at the micro. The PC can then control the microprocessor via the debug port of the target ARM chip.

If you are unfamiliar with the use of "On-Chip-Debugging" we have a short tutorial

There are  two models in the range  -  The  Universal  which is lower cost and the  Universal - FX  which provides significant performance improvements.

Both support the Cortex (see below † ) as well as the NXP/Freescale architectures

Kinetis  (JTAG and SWD), HCS08, RS08, HC(S)12(X), S12Z, ColdFire V1, +V1 and  V2 - 4 , Qorivva MPC5xxx, DSC

And have these Features

Fast, hassle-free USB 2.0 communications interface

Draw their power directly from the USB port – no external power supply needed

Multi-voltage support for targets ranging from 1.6 to 5.25 Volts

Includes ribbon cables for all supported architecture

    

 

The USB Multilink Universal FX

As well as supporting all the architectures listed for the Universal, in addition, these are supported:-

      683xx / CPU32, HC16, MPC5xx/8xx and Power Architecture® PX series

For Synchronous architectures such as the Cortex,  Qorivva,  Coldfire V2-V4, 683xx, HC16, Power Architecture PX Series and the DSC the communications can run at 4 to 10 times faster than the USB Multilink Universal or the older parallel Multilink interfaces.

         

Also it can provide 200 mA power to target MCU and it provides  I/O line clamping for added protection

Development Software support

By adding the Flash Programming Software these units can program Flash memory and EEPROMs on the chip or attached to it. They are suitable for both development and small production runs

P&E Products support a wide range of Cortex Development options

 Freescale CodeWarrior 10.6,   IAR  Embedded Workbench,   Keil  µVision

--   Built in support for Multilink Universal & FX as well as Cyclone Universal for both Debugging and Programming

KDS  Kinetis Design Studio,   Atollic True STUDIO,  Cosmic IDE & ZAP 

 --   Use the free P&E GDB Server to support  Multilink Universal & FX as well as Cyclone Universal for both Debugging and Programming

Unit programs  A set of C library calls that provide an API for using the BDM interface.  Ideal for those who need to write their own PC based test or diagnostics programs.  The standard version includes a license for 5 units.  The distribution version provides unlimited production of applications.

 

Cyclone ARM programs Cortex chips from Kinetis, STM32, NXP LPCs, Texas Stellaris. ( it is lower cost than the Universal if you are just using it for ARM production programming for more info )

Cyclone STM programs STM32 as well as STM8 and SPC56

ARM Cortex Flash Programming Software

An interactive flash programming software package that allows you to program/reprogram both internal and external flash devices in-circuit, via a P&E interface cable. Perfect for development, production line programming, or field firmware upgrades. P&Es products contains our entire library of setup files for this processor, and includes both interactive and command-line versions for use in development and production. 

To see which Flash devices P&E support follow this link .

Flash memory functions are : 

Program P&E Programmer screen shot
Verify
Blank check
Upload
Display
Erase

 

Cyclone Universal On Chip flash programmer and Debugger

 

 

Works with Kinetis, ARM Cortex , ColdFireV1--4,
  MPC5xxx Qorivva (AKA Nexus), MPC5xx/8xx,
Power Architecture S32, PX, DSC, MC56F8xx
STMicroelectronics SPC56,

 MAC7xxx (ARM)

68HC08  HCS08/RS08   68HC12/S12   S12X/12Z

Cyclone Universal Flash programing tool

 

† ARM Cortex M4 currently supports the following families:  ATMEL SAMxxx, STM32, NXP M0,M3,M4, Freescale Kinetis (all), S32, TI-Stellaris LM3S,LM4,TM4C12xx, Infineon XMC4xxx, Maxim 716xx, Silicon Labs EFM32,SiM3, Cypress PSoC®4, Toshiba TX00,TX03,TX04 as well as a wide range of on and off chip SPI and flash memories.

 

 

P&E's latest product is a version of their Cyclone box that covers the widest range of target CPUs so far. It can be used for Debugging via its fast USB or Ethernet interface with support available in most popular software packages including GCC/GDB.  The same box can then be used as a standalone unit for field programming or as a production programmer in an ATE setup (batch or DLL driven).

For more details see this page

 

And now with faster links to both the PC and the target the Cyclone Universal FX  can speed up the production line and add extra security to your programming process. ......... For more details of this product  Cyclone Universal FX

 

 

CPU Support and features are as for the Cyclone Universal with the following enhancements :-

  • USB 2.0 link now supports "High-speed" protocol (up to 480Mb/sec link to the PC).

  • 1 Gbyte internal memory, no practical limit to # of images held.

  • SDHC Port for even more space.

  • For most recent CPUs ( e.g. Cortex M0-4, Qorivva and Coldfire) a variant of the communication link to the target is provided that increases the download speed to a max of 25Mb/sec giving up to 5 x faster download of data.

  • Additional security features include ensuring that if you outsource your production no one can "run off a few units" without you knowing.

Cyclone Universal Flash programing tool

 

The Cyclone Cortex can be used in 3 different modes:

  • Interactive programming packages are provided for all supported CPU families. 
  • Or you can link it to a PC, download multiple target programs to it and then disconnect it from the PC.  It then becomes a manually controlled, standalone  flash programmer for on chip or off chip memory.
  • Or it can be driven by a PC via the Ethernet, USB or Serial port with automated commands either using command line instructions or from a C program using the dll included in the package.

A Software Development Kit is available that allows multiple Cyclones to be driven by a single CPU for economical operation in large production environments.

 

NEW!  Watch a brief video demonstrating how the Cyclone family would program a device:

Right click and select "Watch on YouTube" for a larger image

 

 

Cyclone Automated Control Package

These Windows packages include a command line driven application, Cyclone Launch a batch control system and a set of DLLs providing a range of features of value when using the Cyclone in production situations :-
Basic Edition -----  Free Download ----  Controls  a single Cyclone from a PC via USB or Ethernet allowing one Programming Image to be held on the Cyclone which does not have to be downloaded every time so increasing performance.
Professional Edition -----  Controls  up to 3 Cyclones from a PC via USB or Ethernet, allowing up to 8 Programming Images, which do not have to be downloaded every time, to be changed on the fly and dynamic data such as serial numbers to manipulated from the PC. Supported devices can be programmed in parallel, even if they are different devices with different data.
Enterprise Edition -----  As for the Pro version but unlimited numbers of Cyclones may be controlled from a single PC, More than 8 images can exist on the Cyclones and Licences for 5 end user PCs are included.  Also provided is a full description of the RS232 and Ethernet command Protocols so that non Windows users can implement similar functionality.

 

 

For more Information:

An overview of P&E products Summary of P&E tools for programming most NXP/Freescale Families from HCS08 to PPC,  Arm Cortex, Renesas, Hitachi and STMicro devices
Kinetis If you are using the Kinetis chip our Kinetis page shows the wide range of different software packages that our products support


Home Shop Products Supported Chips Information Zone Contact Site Map
 
Computer Solutions Ltd
3 b Claremont Road,   West Byfleet,  Surrey  KT14 6DY
 
Telephone: +44 (0) 1932 355630    
Email: sales@computer-solutions.co.uk      Web: www.computer-solutions.co.uk
 
Copyright © 2017 Computer Solutions Ltd